How to Assemble and Use the Dedicated EVO Base

🛠️ What Is the EVO Base and What Is It Used For?

The dedicated EVO base is an accessory designed to create a complete, organized and functional outdoor cooking station.

The structure provides a dedicated support for the EVO oven, integrating useful spaces for food preparation, accessory storage and workspace organization.

The base includes:

Side shelves: provide additional workspace for food preparation and serving.
Internal shelves: offer storage space for accessories.
Integrated pizza peel holder: allows you to keep your pizza peels organized and within reach.
Gas cylinder compartment: provides a dedicated space for the gas cylinder.
Four swivel wheels: make positioning and moving the base easier.
Two wheels with brakes: allow you to secure the base in the desired position.

The EVO base is designed for anyone looking for a coordinated solution that complements the oven and helps keep the outdoor cooking area organized.

📦 Is the EVO Base Included with the Oven?

The dedicated EVO base is an accessory that can be paired with the oven. It is not required for the oven to operate.

EVO can be installed:

On a suitable countertop or supporting surface, following the user manual's requirements for stability, load capacity, materials and safety clearances.
On the dedicated EVO base, designed to provide a complete cooking station with shelves, a pizza peel holder and wheels.

The choice depends on your outdoor kitchen configuration and how you plan to use the oven.

Before purchasing, always check the contents of the product package or any configuration offered by your retailer.

🔧 How Do You Assemble the Dedicated EVO Base?

The EVO base must be assembled by following the official Alfa Forni assembly sheet, which illustrates the procedure through 22 numbered steps.

The sequence covers wheel installation, frame assembly, panel and shelf attachment, and installation of the side shelves with their supports.

Before you begin:

Choose a sufficiently large workspace with a flat surface.
Open the packaging and identify the base components.
Check that all screws, nuts, wheels and tools listed in the assembly sheet are present.
Keep the original assembly sheet available for reference.
Do not place the oven on the base until assembly is complete.

Main assembly stages:

Wheel installation: fit the four wheels, distinguishing between the two wheels with brakes and the two without brakes.
Frame assembly: connect the structural elements and panels in the illustrated sequence.
Installation of internal shelves and components: complete the structure using the specified fasteners.
Side shelf installation: attach the work surfaces and support rods according to the assembly diagrams.
Final inspection: check that all components are correctly positioned and securely fastened.

📌 Important: This description summarizes the assembly stages but does not replace the 22 illustrations in the official assembly sheet, which must be followed in the specified order.

Do not modify the components or use fastening systems other than those provided.

🔩 What Components and Tools Are Required for Assembly?

The EVO assembly sheet lists the fasteners, wheels and tools required to assemble the base.

The illustrated components include:

46 M6 screws.
30 M6 nuts.
4 M12 nuts.
2 wheels with brakes.
2 wheels without brakes.
2 support rods.
4 shaped support components.
4 mm Allen key.
10 mm and 19 mm wrenches.

Each component must be installed in the correct position and according to the instructions provided in the assembly sheet.

If a component is missing or does not match the illustrations, do not attempt to improvise the assembly. Contact your retailer or Alfa Forni customer support.

📍 Where Should the EVO Base Be Positioned?

The assembly sheet specifies that the base must be placed on a perfectly level surface.

Before positioning the oven, make sure that:

The supporting surface is flat and stable.
The structure is fully assembled.
The wheels are securely attached.
Both wheel brakes are engaged.
The selected location complies with the ventilation and safety requirements in the EVO user manual.

The oven manual also specifies a minimum clearance of 20 cm from walls and other equipment, with greater clearances required around the flue and above the oven.

Safe distances from flammable materials and any requirements for installations beneath overhead structures must also be respected.

Warning: The wheels make it easier to move the base, but during operation the base must remain stable with both brakes engaged.

🔥 How Do You Position the EVO Oven on Its Base?

The oven must only be placed on the base after the structure has been fully and correctly assembled.

Before proceeding:

Make sure the oven is switched off and completely cool.
Position the base on a perfectly level surface.
Lock both wheels equipped with brakes.
Make sure the top supporting area is clear and the structure is stable.
Position the oven according to the installation instructions for both the oven and the base.
Check that the oven is stable before proceeding with the gas connection.

The EVO user manual requires the oven's feet to be used to ensure proper airflow between the underside of the appliance and its supporting surface.

Never install the oven on the base while it is switched on or still hot.

If the oven is used with gas, the connection must comply with the user manual and be checked by qualified personnel.

🛞 How Do the EVO Base Wheels and Brakes Work?

The EVO base features four swivel wheels, two of which are equipped with brakes.

The wheels allow you to reposition your outdoor cooking station when necessary.

To move the base correctly:

Make sure the oven is switched off and completely cool.
Check that it can be moved safely, without interference from connections or accessories.
Keep people and objects clear of the movement area.
Release the wheel brakes.
Move the structure with extreme care.
Once the base is in the desired position, engage both brakes again.

Warning: The official assembly sheet prohibits moving the base while the oven is operating.

Do not attempt to move the structure while the oven is still hot.

🧰 What Are the Side Shelves and Integrated Pizza Peel Holder Used For?

The EVO base includes work surfaces and storage spaces designed to keep your cooking station organized.

Side shelves

The side shelves provide additional workspace during food preparation and serving.

They can be used to support objects and accessories compatible with their load capacity and intended conditions of use.

The assembly sheet specifies a maximum shelf load capacity of 30 kg.

Do not exceed this limit. Do not use the shelves as seats, steps or supports for loads they are not designed to carry.

Internal shelves

The internal shelves provide space to organize accessories for your outdoor cooking station.

Integrated pizza peel holder

The pizza peel holder allows you to store pizza peels in their dedicated slots, keeping them easily accessible during food preparation.

📌 Tip: Keep your accessories organized and always make sure they do not interfere with the wheels, gas connections or openings required for ventilation.

⛽ Can a Gas Cylinder Be Stored Inside the EVO Base?

Yes. The EVO base features a dedicated gas cylinder compartment.

The assembly sheet specifies a maximum gas cylinder capacity of 25 kg.

This value represents a load limit for the base and does not replace the need to verify:

The actual dimensions and correct positioning of the gas cylinder.
Compatibility of the cylinder and pressure regulator with the oven.
Ventilation requirements.
Local regulations governing LPG installation and use.
Correct positioning of the gas supply hose.

The assembly sheet also notes that the gas cylinder may leave rust marks on the base.

Important: The gas connection must be carried out and checked according to the oven's instructions by qualified personnel. Do not store unused spare gas cylinders near the oven.

⚠️ What Safety Precautions Should Be Followed When Using the EVO Base?

The official EVO assembly sheet specifies several essential safety precautions:

Do not move the base while the oven is operating.
Do not place the oven on the base while it is switched on or still hot.
Position the base on a perfectly level surface.
Always engage both wheel brakes during normal operation.
Exercise extreme caution when moving the structure.
Keep people and objects away from the base during movement.
Never touch the underside of the oven while it is operating or immediately after use.
Respect the maximum gas cylinder capacity of 25 kg.
Do not exceed the maximum shelf load capacity of 30 kg.

Following these instructions is essential for the safe operation of your EVO cooking station.

🧽 How Should You Clean and Maintain the EVO Base?

Regular maintenance helps keep the base organized and in good working condition.

Before cleaning:

Switch off the oven and wait until it has completely cooled down.
Make sure the base is stable and the wheel brakes are engaged.
Remove any residues from the shelves and accessible storage spaces.
Use cleaning products and methods suitable for the surfaces, avoiding tools that could damage the finish.
Periodically check that the wheels, brakes, shelves and fasteners are in good condition.

If the gas cylinder has left traces of oxidation, avoid using abrasive cleaning methods not specified in the documentation and contact customer support if you are unsure how to proceed.

Do not carry out maintenance operations that could compromise the stability of the structure.

❓ What Should You Do If the EVO Base Is Unstable or a Component Does Not Fit Correctly?

If you encounter problems during assembly or use:

Check that the base is positioned on a perfectly level surface.
Make sure the components have been assembled in the order specified in the assembly sheet.
Check the positioning and secure attachment of the wheels.
Make sure both brakes operate correctly.
Verify that all required screws, nuts and supports are present and correctly installed.

If the base remains unstable, do not use the oven on the structure until the problem has been resolved.

Do not modify the base, drill additional holes or replace structural components with unauthorized parts.

For assistance, contact Alfa Forni at info@alfaforni.com.

📩 Where Can You Find the EVO Base Assembly Instructions and More Information?

The official EVO BASE Assembly Sheet includes the component list, safety warnings and 22 numbered illustrations to guide you through assembly.

It is important to refer to this document throughout the assembly process, as it shows the correct positioning of the components and fastening systems in detail.

For more information about the oven, dedicated base and available documentation:

🔗 Discover EVO on the Alfa Forni website

If you have questions about assembly or base components, contact Alfa Forni customer support at info@alfaforni.com.